English
  • 中文简体
  • English
Home> News>Recent news>How should a high speed automatic polisher be used?

How should a high speed automatic polisher be used?

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-10-09

Overview:For mechanical equipment, people naturally hope that the faster the processing speed, the better, but not all conditions are suitable for high-speed equipment, such as high-speed polishing machine, its use has certain principles.

How should a high speed automatic polisher be used?

For mechanical equipment, people naturally hope that the faster the processing speed, the better, but not all conditions are suitable for high-speed equipment, such as high-speed polishing machine, its use has certain principles. Only by understanding what a device needs to pay attention to in its use can it be better to use this device to create more benefits. Here we explain to the use of high-speed polishing machine, mainly divided into three major points.

The high-speed automatic polishing machine has strong technicality. It is very likely that safety problems may occur due to improper operation. Therefore, the staff who perform high-speed polishing machine operation must be professionally trained and fully understand the safe operation rules of the high-speed polishing machine. If the high-speed polishing machine does not operate normally, The staff cannot use the operation.

The use of high-speed automatic polishing machines has high requirements on the environment, so be sure to check the environment before use to avoid danger. The polishing area should not be longer than the length of the power cord. When the polishing pad is dusty or dirty, it should be cleaned in time. If it is not clean, replace it with a new one. If it is installed or replaced, the power must be cut off. get on.

If there are debris or ropes under the polishing pad, the resistance will increase the resistance and the belt will break. Therefore, it is necessary to check and clean it frequently. The operator should wear safety protective clothing. When working, do not wrap the power cord inside the polishing head or step on the power cord. Keep the hands and feet away from the polishing head that is rotating at high speed to avoid danger.

When the high-speed automatic polishing machine is running at high speed, the operator cannot release the operating handle, and the handle must be released when the high-speed rotating polishing head stops rotating completely.


Message BoardPlease write down your question and we will respond to you within 24 hours.