From：Zhaoqing second machine tool works Co., Ltd. Release time：2019-09-04
Overview：The management of the polishing machine production line requires some skills to increase the efficiency and quality of production while reducing the safety hazards at work.
Polishing machine production line management skills
The management of the polishing machine production line requires some skills to increase the efficiency and quality of production while reducing the safety hazards at work.
1. The voltage of the socket is identified above all power outlets to prevent low voltage devices from being mistakenly connected to high voltage.
2. All doors are marked in front and behind the door to open or "pull". It can greatly reduce the chance of damage to the door, and it is very convenient for ordinary entrance and exit.
3. The instructions for the products that are urgently produced are distinguished by another color. It is easy to remind the priority to arrange the production line, give priority to inspection, prioritize packaging and prioritize shipment.
4. All containers with high pressure inside should be firmly fixed, such as fire extinguishers and oxygen cylinders. The possibility of accidents can be less likely to occur.
5. When there are new people in the production line, the “newcomer homework” is marked on the newcomer's arm. On the one hand, the newcomer is still a newbie. On the other hand, the online QC staff can “care” him.
6. A door that has been in and out of the factory but needs to be closed all the time. It can be equipped with a lever that can be “automatically closed” on the door. On the one hand, the door can be kept closed, and on the other hand, the door is less damaged. No one will force the door to open and close).
7. Before the warehouse of finished products, semi-finished products and raw materials, the maximum and minimum stocks of each product are specified, and the current inventory is identified. You can clearly know the real inventory situation. Preventing inventory from being too high can also prevent products that are sometimes in demand from being out of stock.
8. The switch button of the production line should not be oriented toward the aisle. If it is necessary to face the aisle, it is better to add the cover for protection. This prevents the traffic on the aisle from colliding with the button and causing unnecessary accidents.
9. The control center of the factory is not allowed to enter outside the control center. Prevent major accidents caused by “curious” by unrelated people.
10, ammeter, voltmeter, pressure gauge, etc. rely on the pointer to indicate the value of the various types of tables, with a striking marker to identify the normal work, the pointer should be in the range. This makes it easier to know if the device is in normal operation.
Buy polishing machine, polishing machine manufacturer, our company is worthy of your trust!