English
  • 中文简体
  • English
Home> News>Recent news>The Automatic Punching Machine is made up of several pieces. What process does the punching machine need to process?

The Automatic Punching Machine is made up of several pieces. What process does the punching machine need to process?

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-08-20

Overview:The Automatic Punching Machine is made up of several pieces. What process does the punching machine need to process?

The Automatic Punching Machine is made up of several pieces. What process does the punching machine need to process?

1. Automatic punching machine hydraulic head

Punching machine head

2, CNC punching machine servo feeding rack

Automatic punching machine feeding rack

3, automatic punching machine oil system

Punching machine oil circuit

4, punching machine punching mold

Punching machine mould

What are the processes of automatic punching machines from parts to assembly?

1, the first need to draw the automatic punching machine equipment drawings and processing drawings of various components

2, buy materials, cutting, grinding rough embryos

For example, the machining process and sequence of the hydraulic head, the servo feeding frame and the mold are respectively grinding the rough blank with a grinding machine, positioning the drilling according to the processing drawings, and then milling and milling the plane in turn. The maximum size of the milling machine is not to exceed the effective working surface of the milling machine.

After the milling machine is finished, it needs to be polished again with a grinder, and then processed by wire cutting. What are the accessories that need wire cutting?

There are molds that need wire cutting, fixtures on the servo, and small precision parts that are not well milled.

So after experiencing so many cumbersome processes, is it over? NO NO

There is also an externally processed quenching bonfire.

After the end of the road, is it OK to finish it?

Yes, the part of the parts has been finished so far, but this does not mean that the machine is finished! The most important step is the completion of the machine.

The assembly is divided into four steps:

1. The hydraulic head needs to be equipped with a hydraulic cylinder and a displacement ruler.

2, the servo feed rack needs to be installed with rails, racks or customers with optional screw. These are installed well, and the servo slider base that carries the servo motor needs to be installed on the guide rail, and step by step can not be sloppy!


Message BoardPlease write down your question and we will respond to you within 24 hours.