English
  • 中文简体
  • English
Home> News>Recent news>The difference between automatic polishing machine and manual polishing machine

The difference between automatic polishing machine and manual polishing machine

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-08-27

Overview:The automatic polishing machine can save manpower and material resources to reduce people's fatigue strength, reduce the production cost without being affected by climate change, and ensure the completion of quality.

The difference between automatic polishing machine and manual polishing machine

The automatic polishing machine can save manpower and material resources to reduce people's fatigue strength, reduce the production cost without being affected by climate change, and ensure the completion of quality.

Due to the continuous improvement of the degree of automation, the feeding and retracting in the production process are relatively simple, and the safety of personnel is guaranteed. At the same time, the polishing quality is easy to control, the uniformity rate is high, the smoothness is bright, especially the heavier workpieces. The manpower cannot be operated, and the straightness is high and the depth is good. Products with high surface mirror purity can only be finished by mechanical automatic polishing. Manpower is irreplaceable. In short, in modern intelligent society, the replacement of manual operations by equipment is an irreversible trend, and it is also a natural trend of factory modern production.

automatic polishing machine

Manual polishing disadvantages:

When the human hand is operated, it is affected by the environment, air and pollution, and the damage is relatively large. The technical requirements are also high, and it requires a certain amount of work experience to be competent; at the same time, it consumes a lot of physical strength, and the quality of the weather directly affects the quality and the completion of the production capacity. For the workpiece, the manual operation is flexible, and the uniformity of the product with high brightness is poor. The quality of batch products cannot be consistent, and the production capacity is backward, which is not suitable for mass production.


Message BoardPlease write down your question and we will respond to you within 24 hours.