English
  • 中文简体
  • English
Home> News>Recent news>The Metalware Automatic Production Line consists of the following three main components

The Metalware Automatic Production Line consists of the following three main components

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-03-22

Overview:Metalware Automatic Production Line connects the various machining stations together through the conveyor system. The original parts (raw parts) enter from one end of the line, are processed on one station and then transported by the conveyor system to the next next On the workstation, no workstation completes the different processing steps, and after the last workstation, the parts that complete the processing are obtained.

The Metalware Automatic Production Line consists of the following three main components:

·Automatic parts conveying system

· Single machining station (such as automatic machine tools)

·Control System

The machining stations are connected together by a conveyor system. The original parts (raw parts) enter from one end of the production line, are processed on one station and then transported by the conveyor system to the next adjacent station. A workstation completes different machining operations, and after the last workstation, the parts that complete the machining process are obtained.

Metalware Automatic Production Line

There may also be some inspection stations on the Metalware Automatic Production Line for automatic inspection of the quality of the workpiece during machining. In addition, there may be some manually operated workstations that are used to replace automated processes that are extremely difficult to automate and cost-effectively.

Since the machining of parts usually requires high machining accuracy, the positioning accuracy of the parts is naturally high, so the automatic conveying of the parts is carried out by a special jig, the pallet. The pallet can not only accurately position the part to be machined, but also move, position and clamp on the processing station. Since the part can be accurately positioned on the pallet, it can also be moved, positioned and accurately positioned on the processing station, thus ensuring accurate positioning of the part relative to the machining tool. This automated processing line is usually closed end to end due to the need to recycle the pallets.


Tags
Message BoardPlease write down your question and we will respond to you within 24 hours.