From：Zhaoqing second machine tool works Co., Ltd. Release time：2019-03-22
Overview：The key to the operation of the polisher is to try to get the maximum polishing rate in order to remove the damage layer from the polishing as quickly as possible.
How the polishing machine works
The key to the operation of the polisher is to try to get the maximum polishing rate in order to remove the damage layer from the polishing as quickly as possible. At the same time, the polishing damage layer will not affect the final observed tissue, ie, it will not cause false tissue. The former requires the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polished damage layer is also deeper; the latter requires the use of the finest material to make the polished damage layer shallower, but polished The rate is low.
The following describes the performance and features of the commonly used Metalware Polisher. The polishing machine is specially designed for the surface treatment and treatment of steel, aluminum and copper metal products. Dozens of original accessories meet different needs, and it is easy to manufacture snow patterns, drawing patterns, wave patterns and matte with various precisions. Surface, mirror, etc., quick repair of deep scratches and slight scratches, rapid grinding and polishing; welds, nozzle marks, oxide film, stains and paints, suitable for deburring, rounding, decorative metal processing, It does not form shadows, transition zones and uneven decorative surfaces during processing, and is an important equipment for metal product production lines.
Polishing machine is suitable for the following industries: wood, furniture industry such as flat wood, furniture metal handles and other workpiece sanding; hardware (metal) materials and products aluminum profiles and products, stainless steel products and utensils, copper profiles and products, plumbing and sanitary equipment , locks, lighting products, signage nameplates, hardware craft ornaments, knife and scissors, door flaps, car bicycle parts, tableware, shackle products, buttons, belt buckles, mobile phone casings, watch industry, etc. Light drawing; electronic parts, electronic equipment such as electronic parts, flat sanding and so on.