English
  • 中文简体
  • English
Home> News>Recent news>Ultrasonic cleaning machine maintenance

Ultrasonic cleaning machine maintenance

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-04-29

Overview:The Ultrasonic Washing Line cleaning machine is mainly composed of an ultrasonic generator and an ultrasonic transducer. The ultrasonic transducer is a sandwich-type transducer made of lead zirconate titanate piezoelectric ceramic material, and the piezoelectric ceramic material has a dimensional change under the action of an electric field. The phenomenon that the transducer will produce mechanical vibration under the action of an alternating electric field.

The Ultrasonic Washing Line cleaning machine is mainly composed of an ultrasonic generator and an ultrasonic transducer. The ultrasonic transducer is a sandwich-type transducer made of lead zirconate titanate piezoelectric ceramic material, and the piezoelectric ceramic material has a dimensional change under the action of an electric field. The phenomenon that the transducer will produce mechanical vibration under the action of an alternating electric field.

Seismic degumming: Our transducers are made of cement and screw fastening. This is not the case under normal circumstances. Due to the action of the screws, the vibrators will not fall off the vibrating surface after degumming. The method of judging is to gently shake the tail of the vibrator by hand and carefully observe the glue on the vibrating surface to make a judgment.

Generally, the output power of the ultrasonic power supply is normal after the demagnetization occurs, but the vibration is not good due to the vibration of the vibrating surface, and the vibrating surface may burn out after a long time;

The treatment method of the degumming demagnetization is rather cumbersome, and the general situation can only be sent back to the manufacturer to solve;

The most effective way to avoid demagnetization is to pay attention to not hit the vibration surface during normal use. If you want to learn more about YG8 Hydralic Lid Hole Punching Machine nmanufacturers,you can contact us.


Message BoardPlease write down your question and we will respond to you within 24 hours.