English
  • 中文简体
  • English
Home> News>Recent news>What is the inspection and maintenance of the plane polishing machine?

What is the inspection and maintenance of the plane polishing machine?

From:Zhaoqing second machine tool works Co., Ltd.     Release time:2019-10-09

Overview:Regular maintenance and overhaul of the plane polishing machine can keep the automatic polishing machine in good production operation to ensure normal production. Before the inspection, the front level power switch that enters the polishing electrical control cabinet must be disconnected, and the warning sign of “blackout maintenance, do not close” must be hung.

What is the inspection and maintenance of the plane polishing machine?

Regular maintenance and overhaul of the plane polishing machine can keep the automatic polishing machine in good production operation to ensure normal production. Before the inspection, the front level power switch that enters the polishing electrical control cabinet must be disconnected, and the warning sign of “blackout maintenance, do not close” must be hung. Then, the total circuit breaker of the electric control cabinet of the polishing machine itself is disconnected, and then the miniature circuit breaker of each circuit is disconnected. When the control contactor is frequently turned on and off due to the operation of the equipment, it is necessary to ensure that the contact of the contact is good and the terminal is not allowed to loosen. The setting of the thermal relay for protecting the motor is suitable and meets the protection requirements.

The inverter of the plane polishing machine is installed in the electric control cabinet. For the power drive device of the cloth wheel motor, it is a static device centered on the semiconductor device. The temperature, dust, vibration and other use environments will affect the aging and life of the product. Therefore, it is necessary to ensure that the electric control cabinet is clean, clean and free of dust. Therefore, at the weekend, the electric control cabinet should be cleaned and maintained. Generally, the leather tiger is used to blow off the dust in the inverter.

Maintenance of the plane polishing machine: First of all, we must ensure that the automatic polishing machine is stable and firm, whether there is loose or skewed phenomenon, do the cleaning work of the machine of the round tube polishing machine, and regularly use the lubricating oil for the production and maintenance of the automatic polishing machine; Regularly check the power cord to see if there is any power supply exposed. If the power cord is replaced in time, protect the drive motor in time. If it is found that the motor does not turn or stop, check and repair it in time; do the automatic polishing machine regularly. The fastening of the mechanical screws. Proper use and maintenance of equipment can extend the life of the equipment and increase efficiency in machining production.


Message BoardPlease write down your question and we will respond to you within 24 hours.